SGY-LT68 SERIES POWER METER
ULTEGRA 6800™ Single Leg Power Meter
- Fully Integrated Strain Gauge for force measurement
- Easy connectivity with ANT+ compatible Cycle Computers
- HDPower Metrics when connected to Pioneer Cycle Computers
- Lightweight Power Sensor only 22 Grams
- 165, 170, 172.5, and 175, and mm cranks arms available
Price$799.99
Pioneer’s most affordable step into power measurement
Far beyond what a simple heart rate monitor can tell, a power meter is the most valuable and necessary tool any cyclist can use to measure and quantify their efforts. Our unique Strain-Gauge technology measures the deflection (or bending) of the crank arm to continuously quantifies your riding effort. No other cycling tool can accelerate your progress faster than working with a power meter.
12 point force measurement for high accuracy and advanced metrics
Pioneer measures pedaling forces every 30˚, for 12 points of measurement per revolution. However, within those 12 points, Pioneer scans those pedaling forces an incredible 16 times, for an unbelievable 192 data points each rotation of the crank! This level of measurement is what leads to the accuracy of Pioneer power meters, as well as the basis for HDPower Metrics analysis.
Advanced HDPower Metrics further power and pedaling metrics analysis
Pioneer’s Cycle Computer unlocks the HDPower Metrics that allow riders to see Force Vector analysis, as well as Torque Vector and Pedaling Efficiency power metrics. These can be viewed on the Cycle Computer while riding, or in post-ride analysis using Pioneer’s free cloud-based Cyclo-Sphere software. Introduced over two years ago, these innovative features have not been matched by any of our competitors.
Compatible with ANT+ Cycle Computers
ANT+™ is a low-powered (2.4GHz range) wireless communications standard used by most cycle computer brands. The Pioneer Power Meter can easily pair with ANT+ compatible cycle computers and display power measurements that are available on that computer. For the full range of never-been-seen-before data including force vectors, torque vector, and other measurements, it must be paired with the Pioneer Cycle Computer.
A path for consumers to upgrade their system to a Dual Leg power meter system as they grow with their power analysis
Upgrade your analysis by adding a drive side upgrade kit, send in your existing crank to be upgraded to a Dual Leg system. There is no better, or more detailed tool for analyzing power or pedaling balance metrics than a Dual Leg system, especially when combined with Pioneer’s HDPower Metrics.
Race-tested, rider-perfected
The Pioneer Power Meter is built to perform in the toughest conditions. It was refined over a punishing season of racing through rain, snow, cobbles, mud and the thigh-burning climbs of the world’s most prestigious grand tours. It’s lightweight, fully-integrated design adds just 64 grams to your crank, measures up to 2,150 Watts @120 RPM, and is accurate to within +/- 2%. It can be easily calibrated for varying temperatures and elevations and is available in red and black transmitter caps.
- Hear from UHC Pro Cycling about their experience
Key Features
- Shimano FC-6800 ULTEGRA Crank Arm
- 165 / 170 / 172.5 / 175mm
- N/A
- Left Only
- Left Only
- Left Only
- For use with Pioneer Cycle Computers
- For use with ANT+ Cycle Computers
- Left Only
- +/- 2%
- N/A
Pioneer Power Mode with Pioneer Cycle Computer
- Left Only
- Left Only
- Left Only
- Left Only
- Left Only
- Left Only
- Left Only
- Yes
- Yes
ANT+ Power Mode with ANT+ Computer
- Estimated
- No
- No
- Yes
- Yes
- Yes
- Yes
- Yes
- Yes
- Yes
- Yes
- Yes
After Ride Analysis
- Yes
- Upgradeable
- Yes
- Yes
- Yes
Installation
- Yes
- x1
- x1
- Yes
- Yes
- 9mm
- N/A
- Yes
- CR2032 x 1
- 180 hours
- 219g
- 22g
- N/A
- 92.5 × 34.7 × 8.7
- -10 to 50°C
- 2 Years
- Magnet (Patch x 1 & Arm type x 1), CR2032 Battery x 1, User’s Manual
Installation Videos
Overview Videos
*1 Requires Pedaling Monitor Mode and Pioneer Cycle Computer
*2 Not all ANT+ Cycle Computers can display all ANT+ power metrics. Check you computers owners manual for a complete list of displayed metrics
*3 Not all frames are compatible, contact your authorized Pioneer Cycle Sport Dealer for compatibility and fit measurements
Specifications and design subject to modification without notice.
PIONEER is a registered trademarks of Pioneer Corporation.
ULTEGRA is a trademark of Shimano, Inc.