SGX-CA500

GPS Cycle Computer with built-in WiFi
1.87” Touch-screen LCD Cycle Computer

  • Built-in GPS, Barometer and Themometer
  • Built-in WiFi for easy upoading to Cyclo-Sphere®, STRAVA® & Training Peaks®
  • Force Vector Display with Pioneer Power Meter
  • 6 programmable screens views with 16 screen configurations
  • Real-time display of over 100 different data points

 

Price$49.99

cycle close up image

Easy, Intuitive touch-screen operation

A few quick swipes gives you access to your state-of-the-art ride data. Intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87 inch LCD screen makes it easy to see critical data while you ride.

image of line break

ca500 touch screen image  

Convenient Touch Sensitive Control

A few quick swipes gives you access to your state-of-the-art ride data. Intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87 inch LCD screen makes it easy to see critical data while you ride.

image of line break

display image of CA500  

Monitor force vectors and pedaling efficiency in real time

When used with a Pioneer Power Meter, Pioneer has created the only Power Meter to measure force and direction of force in 12 locations – or every 30 degrees – while pedaling. When used with a Pioneer Cycle Computer, these measurements are graphically displayed as force vectors. These force vectors allow you to analyze the unique characteristics of your pedal stroke and calculate pedaling efficiency. And you can monitor it all in real-time on a Pioneer Cycle Computer, while you ride.
- Watch real time Force Vector measurement

image of line break

torque vector screen shot image  

The industry’s first accurate torque vector measurements.

When it comes to measuring torque vectors, there’s nothing approximate about it. Pioneer has designed the only Power Meter to provide precise torque vector readings at 12 points of every pedal stroke. These can be monitored in real-time on a Pioneer Cycle Computer.

image of line break

pioneer team riders  

Race-tested, rider-perfected

The Pioneer Power Meter is built to perform in the toughest conditions. It was refined over a punishing season of racing through rain, snow, cobbles, mud and the thigh-burning climbs of the world’s most prestigious grand tours. It’s lightweight, fully-integrated design adds just 64 grams to your crank, measures up to 2,150 Watts @120 RPM, and is accurate to within +/- 2%. It can be easily calibrated for varying temperatures and elevations and is available in red and black transmitter caps.
- Hear from UHC Pro Cycling about their experience

image of line break

ANT+ logo  

Compatible with ANT+ Sensors

The Pioneer Cycle Computer are compatible with ANT+ compatible heart rate monitors, cadence sensors and speed sensors. Track heart rate data during your ride for instant feedback. Get cycling speed, distance traveled and pedaling cadence based on actual tire and pedaling rotations. The Pioneer Cycle Computer will also connect to other ANT+ compatible power meters.

image of line break

post ride data with cyclo-sphere  

Post-ride data like you’ve never seen before

It's the ultimate training tool. Cyclo-Sphere lets you analyze up to 199 different data points so you have comprehensive knowledge of every moment of every ride. Simply upload your ride data to Cyclo-Sphere to analyze total power, power in each leg, force vectors, torque vectors, pedaling efficiency, heart rate, speed, cadence, distance, altitude, temperature, and more. This cloud-based analysis is complimentary with your Pioneer Cycle Computer.
- See Pioneer’s Cyclo-Sphere Free Cloud Service

image of line break

strava and training peaks logo  

Easy Wifi upload to Strava and training Peaks

After your ride, the Pioneer Cycle Computer can effortlessly push your data to your TrainingPeaks or Strava account. This can be done automatically through your WiFi network or by USB.

image of line break

Shimano’s Di2 logo  

Shimano Di2 Support

Users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the Pioneer computer to track gearing and system status as they ride. In conjunction with Shimano’s SM-EWW01 accessory (additional purchase required), a Pioneer Cycle-Computer wirelessly receives data transmitted from the Di2 system via a proprietary ANT+ signal and displays system status on its screen. Users will also have the ability to create a custom page on the Pioneer Cycle-Computer to show Di2 vitals including battery status, front and rear gear positions, and gear ratio.
Display
  • 1.87"
  • 160 x128
  • LCD Monochrome Transflective Resistive Membrane
Sensors
Screen Options
  • Via Built-In GPS or Outboard ANT+ Speed Sensor
  • Via Built-In GPS or Outboard ANT+ Speed Sensor
  • ANT+ Cadence Sensor Required
  • ANT+ Hear Rate Monitor Required
  • ANT+ Hear Rate Monitor Required
  • Di2 Electronic Shifting & Shimano SM-EWW01 Wireless Unit Required
With Pioneer Power Meters
With ANT+ Power Meters
Settings & Options
  • 6 Bike Profiles
  • Time / Distance / GPS
  • Brightness / Contrast / Calibration
General
  • Dutch / English / Spanish / French / Italian / Netherlands / Japanese
  • miles/km, ft/meter, fahrenheit/celsius, lb/kg
  • Initialize/Backup/Resore
  • WiFi / USB
  • 4GB
  • 12 Hrs
  • 3 Hrs
  • 4 Hrs
  • 74g
  • 60 x 58 x 18
  • 2 years
  • Handlebar bracket, USB cable, safety strap, users manual, warranty

See what the experts are saying, click on the logos below for in-depth reviews

 

   
         
   
         
       

 

 

 

Installation Videos

 

Cycle Cloud for Mac Download Instruction Steps
Cycle Cloud for Windows Download Instruction Steps

Before using the Pioneer Cycle Computer product...
In order to achieve the most effective use of the Cyclo-Sphere Web Analysis Service, we recommend that you install [Pioneer Cycle Cloud Connect];
1. Cyclo-Sphere User Registration
2. Installation of [Pioneer Cycle Cloud Connect]

What is [Pioneer Cycle Cloud Connect]?
1. [Pioneer Cycle Cloud Connect] will maintain your Cycle Computer in the most up-to-date condition.
2. By connecting your Cycle Computer to your PC using the USB cable provided, you can automatically upload your ride log data to the Cyclo-Sphere Web Analysis Service.

Handling of Ride Log Data (Recording, Upload and Analysis)

[Cyclo-Sphere] User Registration Procedure
1. Access the User Registration Page.
2. Input the necessary information for a partial registration. Information on how to complete registration will be sent to the registered email address.
3.Click on the URL given in the email to access the Registration Page.
4. Enter your password on the Registration Page to complete registration.

Software Installation and Registration Procedure.
1. [Pioneer Cycle Cloud Connect] by clicking on the link above.
2. Please carry out the installation. For details of the Installation Procedure, please see the Download Instruction Steps (links are below download links).
3. Place the Cycle Computer in Update Mode, and connect it to your computer using the USB cable provided.
[Start up the CycloComputer in Update Mode]

  • If the Cycle Computer is connected to the PC, please disconnect the USB cable from the computer.
  • From the Top menu of the Cycle Computer, please select [Settings]
  • Please select [System], then [Firmware Update].A message will be shown regarding the saving of settings and Firmware Update.
  • Please tap on [OK]. The Computer will automatically begin preparing backup data and enter Update Mode.
  • Please confirm that the Cycle computer screen is blank.
  • Please connect the Cycle Computer to the PC using the USB cable. If the screen is flashing, this means the battery charge is low. Please charge fully before updating the Firmware.
  • Follow the instructions in the Installation Screen to Register your Cycle Computer.